|
|
|
|
|
|
|
|
|
|
New Arrivals-mic6 cast aluminum plate,Resistance to deformation
|
|
mic6, mic-6, MIC6, MIC-6, mic6 aluminum, mic-6 aluminum, MIC6 aluminum, MIC-6 aluminum, mic6 aluminum, mic-6 aluminum, MIC6 aluminum, MIC-6 aluminum, mic6 aluminum alloy plate, mic-6 aluminum alloy plates, mIC6 aluminum plate, MIC-6 aluminum alloy sheet, mic6 aluminum alloy, mic-6 aluminum alloy, mIC6 aluminum alloy, MIC-6 aluminum alloy, mic6 aluminum prices, mic-6 aluminum prices, mIC6 aluminum prices, MIC-6 aluminum prices, mic6 ultra-flat aluminum plate, mic-6 ultra-flat aluminum plate, mIC6 ultra-flat aluminum plate, MIC-6 ultra-flat aluminum plate, mic6 deformation aluminum, mic-6 is not deformed aluminum, mIC6 not deformed aluminum, MIC-6 aluminum deformation, mic6 deformation of aluminum alloy, mic-6 is not deformed aluminum alloy, MIC6 deformation of aluminum alloy, MIC-6 is not deformed aluminum alloy, mic6 casting aluminum, mic-6 aluminum casting, MIC6 casting aluminum, MIC-6 cast aluminum, mic6 precision aluminum, mic-6 precision aluminum, mIC6 precision aluminum, MIC-6 aluminum precision, mic-6 aluminum casting, mIC6 casting aluminum, MIC-6 cast aluminum, mic6 aluminum factory , mic-6 aluminum manufacturers, MIC6 aluminum manufacturers, MIC-6 aluminum factory
MIC-6 aluminum precision casting
MIC-6 flatness excellent; high surface accuracy; thermal shock, deformation resistance strong; high-speed machining, hardly deformed.
MIC-6 is the perfect combination of dimensional accuracy and thermal stability.
MIC-6 is the master of many advantages of a single alloy. It is to meet the high demands of modern industry and the development of precision products.
MIC-6 is based on the different thickness, independently of the continuous casting. The use of new casting technology achievements, molten metal is continuously fed, eliminating the seam due interval and junction defects caused due to both sides of the plate heat at a steady rate, so the aluminum thermal gradient stabilized. SNIF filtration using a method and degassing systems ensure no holes and impurities. MIC-6 because of its structure and characteristics of granular stress release after casting, high-speed cutting can be extremely small amount of deformation. Use the correct processing methods, tolerances can be maintained within 0.1 yarn.
MIC-6 properties
1. Good formability, weldability.
2. The high strength.
3. Good use, the interface characteristics of good.
4. easy processing, easy coating.
5. corrosion resistance, good oxidation resistance.
MIC-6 Typical uses
Air tools, automotive tools, namely, Digital Control (CNC) circuit boards, chip printing apparatus, circuit printing apparatus, a dielectric (dielectrics), electronic equipment, food machinery, die casting, heating and cooling mode (heating and cooling patters) , signs, medical equipment, packaging machinery and models, pharmaceutical machinery, printing presses, robotics, vacuum suction (vacuum chucks), and so on.
MIC-6 Typical mechanical properties
Tensile strength: 166MPa
Yield strength: 105MPa
Elongation: 3%
Brinell hardness: 65
Thermal expansion coefficient (average):
20-100 ° C - 23.6 × 10-6m / m.K
20-200 ° C - 24.5 × 10-6m / m.K
Thermal conductivity: 142W / m.K
Conductivity (IACS): 36%
Modulus of elasticity: 71,000MPa
Standard thickness: 6mm-100mm
Standard width: 1212-1572mm
Standard length: 2412,3012,3612mm
MIC-6 is a blend of the most desirable features of many individual metals.The result is a cast aluminum plate that meets the challenge of product accuracy demanded by today’s industry.
Because of its cast granular structure and stress relieving properties,MIC-6 allows high-speed metal removal with little, if any, of the distortion commonly inherent in long grained wrought, flat-rolled metals.
Using proper aluminum machining methods, tolerances in the thousandths can be consistently maintained. MIC-6 is finished to 20 microinches typical on both sides. Thickness tolerances is within +/-.005" from nominal on 1/4"- 4".
|
|
|
|
|
|
|
|
|
|
|
